Specifications and Dimensions
| Glass or LED | Incandescent Chasing | Maximum Sets Run in Series | (Not applicable, cannot be run in series with another set of lights) |
| Color of Bulbs | Multi-color (Green, Blue, Red, Yellow) | Cert. | UL Approved |
| Color of Wire | Green | Warm Up During Operation | Yes |
| Number of Bulbs | 140 | Plug Type | Male Plug Only |
| Spacing between bulbs | 4 inches | Dimmable | Yes |
| Bulb Shape | Minilight | Maximum Current | 3 Amps |
| Replaceable Bulbs | Yes | Voltage | 120 V |
| Total Length | 48 feet 10 inches, approx. | Power | 67 Watts |
| Lit Length | 46 feet 4 inches, approx. | Current Draw | .56 Amps |
| Lead Wire Length (Distance between male plug and first light) | 24 inches | Bulb Height | 11/16 inch |
| Tail Wire Length | Bulb Width | 3/16 inch | |
| Gauge of Wire | 22 AWG | Bulb Diameter | .19 inch |
| Included | 2 Bulbs (3.5 Volt) 1 Fuse (3 Amp, 125 Volt) |
Lifespan Estimate | 1,000 hours |
| Application | Indoor/ Outdoor | Warranty | 90 Days of Normal Seasonal Use |
| Additional Info | Bulb burns out, others stay lit. Bulb removed, other bulbs will go out. | Additional Info | Variable Speed Control with Control Box that has a single knob to control speed of chase |
For CA Residents: Prop 65 Notice
Questions and Answers
Have a Question?
-
How many light sequence "settings or patterns" for this set of christmas lights?
This set of lights does not have sequence settings or patterns but only alternates between 3 different circuits. The set has a control box with a knob that controls the rate of change from slow to fast.
-
I have a 9 foot tree. Would I need one or two?
That depends on the width of your tree, how far into the tree you plan to wrap the lights, and what you think is "enough lights". While a single set would be perfectly adequate, two sets would make a lot more impact on a tree of that height. Keep in mind that the sets cannot be connected into each other so you'd have to match the twinkle rate on the two strings manually.
-
Do these lights have any type clip made on to the bulb base to help hold to the tree limb? Thank you.
No, these lights do not have a built in clip on their bases. They are built like traditional christmas tree lights and are commonly wound in place. You might consider purchasing tree clips if you need a more secure placement.
-
Is there a 100-light version?
No, this is the only version we have currently availailable.
-
Are these LED?
No, these lights are incandescent - traditional glass with a filament.
-
are these led??????
No, these lights are incandescent - traditional glass with a filament.
-
can more then one set be strung together and connected?
No, the set has a male plug but no female end-plug.
-
If one light goes out on the string, do the others stay lit ? Thanks
If one of the bulbs in the string burns out, then the rest of the lights will stay lit. If the bulb is damaged or removed from its socket, the rest of the bulbs will go out.
-
If one light goes out on a color, do the other light of that same color go out or will they stay on?
If a light is burned out, then the rest of the lights in that circuit will stay lit. If a bulb is damaged or partially or fully unseated, then the circuit will be cut and the rest of the lights in that circuit will go out.
