3/8 Inch Red LED Rope Light

Rope lights are a quick & easy way to add a warm glow to a walkway, accent showroom windows, or to outline awnings at a restaurant.

Red is warm and bright and works beautifully for lighting not only Holiday decor but also for adding visual interest to your landscaping.

Cut this rope light spool every 72 inches ONLY between the cut marks with a sharp non-compressive blade to make custom lengths for your project - or you can roll out the entire spool, install the power connector and cord and plug in all 150 glorious feet of goodness!

"Cut marks" are dotted white lines placed along the rope. For each custom length of rope, needed to install a power connector, power cord and an end cap on the opposite end. Three sets of these are shipped with each spool and extra accessories can be purchased for additional custom lengths.

See our Rope Light Assembly Instructions for more information.

Customers have used these clear spool rope lights for projects like:

• lighting a Christmas tree yard sculpture
• down the boardwalk of the marina
• outlining buildings
• lighting the Midway
• marine applications - light up those boats for a parade!!
• Christmas yard sculptures

The hardware needed for up to 4 set ups (4 lengths of rope light) is included with every 150 foot spool. (1 power cord is attached to the spool and also contains 3 power connectors, 3 additional power cords, 3 splice connectors and 30 clips).

Keep in mind that these rope lights have "floating connectors" and the rope light's electrical connection will be broken if you bend the neon at too tight of an angle. If you need to write really small words or make super-sharp angles, this rope light might not be the best choice for your project. If you should over-bend your rope lights, gently work your LED connectors back in place by straightening up your loop. If required, areas that have gone dark during installation in your rope lights can be replaced with splice connectors and a length of rope light from the end of your spool.

Easy to assemble, these rope lights will give you the professional results you are looking for.

As with all of our LED based products, we strongly suggest that these lights be plugged into not only a GFCI outlet but a surge protector as well. If installed outside, confirm that your surge protector is rated for outdoor operation.

Specifications

For CA Residents: Prop 65 Notice

What you need to know

• Cut rope only at cut marks
• Don't apply excessive tension during installation, the floating connections will pull apart
• Repair a section by splicing in a new one with included splice connectors

For more information

Warranty and returns

Please test your lights when you receive them! Everyone is happier when we resolve issues quickly.

Warranty. Our warranty for all our products is 90 days of normal, seasonal use. If a product is defective or fails during the 90 days following receipt of your order, please contact us right away. We will work with you to troubleshoot the problem, and if the issue is not easily and quickly resolved, we will ll correct the situation.

Returns. You can return eligible products when you contact us within 14 days of receiving an order to let us know you are returning items from your order. We will provide you with addressing instructions. Customer is responsible for return shipping.

Eligible products have not been installed and are in their original packaging in like-new condition. If returned products are received within 45 days of receiving your order, there is no restocking fee. After 45 days, a 15% restocking fee will be deducted from your merchandise credit. No returns accepted after 60 days.

Upon receipt of your return, your account will be credited for the cost of the products. Shipping charges are not credited.

See our complete Shipping, Warranty, and Returns Policy for return instructions and additional information.