3/16 inch White Sculpture Clips 100 Count

White deer, angel wings, baby Jesus...they all will glow beautifully when you attach mini lights to your yard sculptures with these clips. This clip works well with all of the incandescent mini Christmas light strings that we sell on this website.

Determine if this clip will fit your frame

This is a must-not-skip step when planning your order. Even if the box your sculpture was shipped in has a diameter dimension, please take time to measure. Quality can vary and so can the size of the wire that makes the frame of your yard art.

The clips on this family of light strings are rigid and a 1/6" variance can make a significant difference.

Instructions

1. Find an adjustable wrench

2. Tighten the wrench down snugly on your metal sculpture frame.

3. Gently slide the wrench off the frame and measure the gap. This is the diameter of your frame and should match this clip.

4. Repeat this process over several parts of your frame. The wire may vary in diameter or if your frame is vintage and has been repeatedly painted, the diameter may vary enough that you'll need to use a combination of sizes of clips to install or repair the lights on your frame.

Will these clips work with my lights strings?

These sculpture clips work with all of our standard incandescent mini lights strings and a few of our LED light strings.

Check the product number of the light strings you are purchasing from us to confirm these are the correct clips.

These sculpture clips work with these light strings families:

All incandescent mini lights -- ML-XXXXXXXX

And these three LED light families that have smaller "normal" bases and work with any of our standard sculpture clips.

LED Lights with these part numbers (XX is the color code)

LED-455XXR-PB24 - 5mm LED Christmas lights

LED-453XXR-PB50 - LED Craft Lights

LED-1157XXR-PB12 - 5mm LED icicle lights

Send us photos of how you are using these clips in your holiday decorations!

I need to replace the lights on my yard sculpture - help!

Reviews Sorting

Clips work great!

The clips I purchased work great for my older deer.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Roxanna J Clark from Swartz Creek on 12/5/2017

Good clip costs to much!

The setup, have a project new or even to up grade the lights on a frame, lets use 100 count string, light string costs $4-7, 3/16" round stock $2.45 for 12', paint $2, 100 3/16" clips $12, so the cheap plastic clips cost more than all the rest of the project. conclusion costs to much so don't do the project or through out the old christmas frames,lol.

Did you find this helpful? 2 of 4 Found Helpful

Reviewed by: Donald from WA on 11/25/2017

Excellent

I really bought these for another project, but the 1/4 clips were so loose, these saved the day. They hold the lights well, and stay put even on the oversized wire.

Did you find this helpful?

Reviewed by: Eric from Texas on 11/22/2017

Just what I needed

I needed to rewire our reindeer with the original light strings that were not working. These clips worked perfectly to allow me to change out to lcd strings and I was able to bring my reindeer out of retirement. Thanks for supplying exactly what I needed.

Did you find this helpful?

Reviewed by: Roy Baker from Colleyville on 12/21/2016

Works

I will tell you that I am very happy with the items I purchased from you. The lights are the perfect length for my project and work fine. The clips are a little difficult to get onto the 3/16th deer frame .... but work fine. Your shipping is outstandingly FAST and packed well to arrive safely. Thanks again. B -

Did you find this helpful?

Reviewed by: B from USA on 10/28/2016

Works great.

Just what I needed. I am not able to find these anywhere in Traverse City, MI.

Did you find this helpful?

Reviewed by: Catherine from United States on 10/6/2016

Awesome clips

Have used 200 already, working great for me. I have had my reindeer for about 20 years, 10 total. Tried several ways to attach the bulbs after original clips broke, these work perfect. Thank you for saving my reindeers. I did not want to have to give them up.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Carole from Tucson, Az. on 12/10/2015

Pleased

The package arrive in great time and I am so pleased with my order. The clips are what I have been searching for, for sometime now. They are perfect and now my deer will look great this next Christmas season. Thank you once again..until next time.

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Sharon G. from USA on 1/23/2015

Works Good

I use these clips on the wire frame of my 30 year old Santa Clause with running rain deer. I have also replaced the light string and the clips work as intended.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: David from Seal Beach CA on 12/27/2014

Work Great

The clips on my lights kept breaking off. The clips solved the problem and arrived quickly. Good product!

Did you find this helpful? 3 of 4 Found Helpful

Reviewed by: Jim from Gonzales, LA on 12/21/2014

Problem Solved!

The clips on my 15 year old doves of peace were failing rapidly. The new clips solved my problem. They arrived quickly following the easy order process.

Did you find this helpful? 3 of 4 Found Helpful

Reviewed by: Bill Murto from Sedona, AZ on 12/18/2014

So-so

Just average clips. They cannot be put on in cold weather without breaking. The plastic is too rigid, with little elasticity. Even warmed up they break. I would say I had 15% breakage trying all tempuratures, even pre-warming them in my pockets.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Mark from Woodinville, Wa on 12/2/2014

Write a Review

Q: Our frame on our Merry Christmas Y'all measures 5/16". Are any of your clips going to fit?

Asked by: Nanny - 11/14/2017

A: Sorry, unfortunately, our clips will break on your frame. Even our 1/4" clip will be a little too small. They are really rigid to keep the lights in place so there isn't much play there.

That's a unique size, I'm glad you measured first.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: CLS Admin Account (11/14/2017)

Q: Do your 3/16" white wire frame clips hold LED lights? If not, can you make a suggestion of what I can use? Thank you.

Asked by: Mitch - 12/4/2016

A: I'm sorry, if the base of your LED lights is larger than a standard mini lights set, we don't have a compatible clip at this time for a 3/16" frame.

I'll add your question to feedback about expanding the sculpture clip line.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: CLS Admin Account (9/27/2017)

Q: How do I buy this item???????

Asked by: TonyThom1951 - 12/14/2015

A: Just select the number of boxes that you need and add to cart with the yellow "Add to Cart" button above.

Then a pop up window will allow you to check out or continue shopping. If you don't see a pop up, please select "see cart" in the upper right hand corner of the website then checkout to complete your order.

Because we hand-pack every order, we do have a $20 minimum order so this may be the issue you are experiencing.

Please call us if you continue to have difficulties placing your order and we'll be happy to give you a hand.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: David Robinson (3/22/2016)

Q: Reindeer light clips- my old rotted ones measure 5/16" and I see you have 3/16", 1/8" Do you think either of these might work?

Asked by: Maureen - 12/3/2014

A: Unfortunately, these clips are made of a stiff plastic material that has very little flex to enable them to hold the clips firmly in place on yard art.

At a size of over 1/4 inch, the clips would more than likely snap if you attempt to install them on a larger frame.

Sorry I don't have a more positive answer.

You might consider measuring at other locations on your frame to see if most of the frame is possibly 1/4 inch as some vintage or older frames may not have a uniform diameter.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Shellie Gardner (12/3/2014)

Q: Do these clips have ridges on inside diameter to keep bulbs in place that have flat bases?

Asked by: Carole - 11/13/2014

A: The inner diameter of these clips are a smooth curve.

Most mini lights do have areas that are flat but these clips have enough of a diameter that they will snug far around the base and work fine without ridges.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Shellie Gardner (11/13/2014)

Q: 3/16 is the outside diameter of the sculpture rod? If this is correct what is the other side dimension of the clip?

Asked by: ron andrews - 11/5/2014

A: The other side is the correct size to snug around a standard incandescent mini light lights.

(They aren't designed for LED light strings that are generally larger.)

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Shellie Gardner (11/5/2014)

Q: How can I be sure this is the size I really need? I don't know exactly how to measure the wire sculpture. I have a few of the bad lights that have the clips built into the light but no sure how to measure them.

Asked by: Brenda - 12/10/2013

A: The easiest way to determine the size of your frame is to use an adjustable wrench and tighten it down on your frame, slide it off and measure the width of the gap. That'll tell you the diameter of your framing material.

Hope that helps!

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Shellie Gardner (12/12/2013)

Questions about this item? Ask here.

LED Sculpture Clip Deluxe 1/4 inch White 5000

Price $232.03

In Stock

LED Sculpture Clip 1/4 inch White 100 pack

Price $12.00

In Stock

3/16 inch Mini Sculpture Clip White 5000-count

Price $215.41

In Stock

Warranty

How long do you warrant your products?

We warrant our products for a period of 90 days of normal seasonal use from the day you receive your order.

Please test your lights upon receipt so if there is an issue we can resolve it as quickly as possible.

See our Shipping and Warranty page for a full discussion of our policies.

Return Policy

I've decided not to use the lights I ordered. What next?

At the Christmas Light Source, we are dedicated to providing all our customers with the highest level of customer service and want you to be 100% satisfied with your purchase. We understand that, at times, returns happen.

It is our policy that you must contact us within 14 days of receipt the shipment of your order to let us know you are returning your purchase. Lights that have been installed cannot be returned.

Lights and bulbs must be returned in their original packaging in like new condition.

Instructions:

Email us via our contact page with your order number or name and shipping address or reply back to your order confirmation email and we'll respond with the correct address and address format to direct your lights to our Returns Department.

We will then refund your purchase less shipping when we receive your return.

Returns must be received within 45 days of receipt of shipment to avoid a 15% restocking fee and returns are not accepted after 60 days.

Shop by Color

Shop by Shape

Special LED Strings

By Bulb Color

By Special Wire Color

Specialty Mini Lights

Incandescent C7/C9 Bulbs

LED Bulbs by Shape

LED Bulbs by Color

Glass Outdoor
String Light Bulbs

Cords for C7/E12, C9/E17 Bulbs

Outdoor String Light Cords (E26)

Bulbs

Outdoor Light String Cords

Number of Bulbs

Color

LED Craft Lights

Clips, Hooks, Stakes

Accessories

3/16 inch White Sculpture Clips 100 Count

3/16 inch White Sculpture Clips 100 Count

Will these clips work with my lights strings?

Q: Our frame on our Merry Christmas Y'all measures 5/16". Are any of your clips going to fit?

Q: Do your 3/16" white wire frame clips hold LED lights? If not, can you make a suggestion of what I can use? Thank you.

Q: How do I buy this item???????

Q: Reindeer light clips- my old rotted ones measure 5/16" and I see you have 3/16", 1/8" Do you think either of these might work?

Q: Do these clips have ridges on inside diameter to keep bulbs in place that have flat bases?

Q: 3/16 is the outside diameter of the sculpture rod? If this is correct what is the other side dimension of the clip?

Q: How can I be sure this is the size I really need? I don't know exactly how to measure the wire sculpture. I have a few of the bad lights that have the clips built into the light but no sure how to measure them.

Warranty

Return Policy

Instructions:

Recently Viewed Items

Christmas Lights and Accessories on Sale!

Quick Links for More Information

Shop by Color

Shop by Shape

Special LED Strings

By Bulb Color

By Special Wire Color

Specialty Mini Lights

Incandescent C7/C9 Bulbs

LED Bulbs by Shape

LED Bulbs by Color

Glass Outdoor String Light Bulbs

Cords for C7/E12, C9/E17 Bulbs

Outdoor String Light Cords (E26)

Bulbs

Outdoor Light String Cords

Number of Bulbs

Color

LED Craft Lights

Clips, Hooks, Stakes

Accessories

3/16 inch White Sculpture Clips 100 Count

3/16 inch White Sculpture Clips 100 Count

Will these clips work with my lights strings?

Q: Our frame on our Merry Christmas Y'all measures 5/16". Are any of your clips going to fit?

Q: Do your 3/16" white wire frame clips hold LED lights? If not, can you make a suggestion of what I can use? Thank you.

Q: How do I buy this item???????

Q: Reindeer light clips- my old rotted ones measure 5/16" and I see you have 3/16", 1/8" Do you think either of these might work?

Q: Do these clips have ridges on inside diameter to keep bulbs in place that have flat bases?

Q: 3/16 is the outside diameter of the sculpture rod? If this is correct what is the other side dimension of the clip?

Q: How can I be sure this is the size I really need? I don't know exactly how to measure the wire sculpture. I have a few of the bad lights that have the clips built into the light but no sure how to measure them.

Warranty

Return Policy

Instructions:

Recently Viewed Items

Christmas Lights and Accessories on Sale!

Quick Links for More Information

Glass Outdoor
String Light Bulbs